Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractUpflow anaerobic sludge blanket reactor--a review    Next AbstractA Retrospective Study in Microsurgical Procedures of Large and Giant Intracranial Aneurysms: An Outcome Analysis »

Environ Sci Pollut Res Int


Title:Study of biological and thermo-chemical pretreatment of organic fraction of municipal solid waste for enhanced biogas yield
Author(s):Bala R; Mondal MK;
Address:"Department of Chemical Engineering and Technology, Indian Institute of Technology (Banaras Hindu University), Varanasi, Uttar Pradesh, 221005, India. Department of Chemical Engineering and Technology, Indian Institute of Technology (Banaras Hindu University), Varanasi, Uttar Pradesh, 221005, India. mkmondal13@yahoo.com"
Journal Title:Environ Sci Pollut Res Int
Year:2020
Volume:20190628
Issue:22
Page Number:27293 - 27304
DOI: 10.1007/s11356-019-05695-w
ISSN/ISBN:1614-7499 (Electronic) 0944-1344 (Linking)
Abstract:"Biogas production from organic fraction of municipal solid waste (OFMSW) not only helps in solid waste management but also combat the food vs fuel dilemma. The presence of lignocellulosic material and other complex compounds in OFMSW hinder biogas production. Therefore, pretreatment is an essential step to increase the hydrolysis rate by converting complex compounds to simpler ones. This work was aimed at effective pretreatment of OFMSW by biological and thermo-chemical means. For biological pretreatment lignin degrading fungal strains, Phanerochaete chrysosporium and Pleurotus ostreatus were employed. Thermo-chemical treatment resulted in higher solubilisation yield in terms of sCOD and VFA making it a more effective method as compared with biological pretreatment. The optimisation of thermo-chemical pretreatment was done by the Box-Behnken design of response surface methodology (RSM). The interactive effect of influencing factors NaOH dose, temperature and time were studied on the response of sCOD, VFA and phenolic content. The sCOD and VFA values were significantly increased by increasing the NaOH concentration, temperature and time to a certain limit. The optimised condition from RSM for maximum solubilisation yield in terms of sCOD, VFA and phenolic content was found to be NaOH dose of 4.72 g/L, temperature 180 degrees C and time 30.3 min. Biogas production was increased by 169.5% after pretreatment at RSM optimised conditions as compared with untreated OFMSW"
Keywords:Anaerobiosis Biofuels/analysis Bioreactors Food Methane *Refuse Disposal Solid Waste/*analysis Box-Behnken design Municipal solid waste Response surface methodology Soluble chemical oxygen demand Volatile fatty acid;
Notes:"MedlineBala, Renu Mondal, Monoj Kumar eng Germany 2019/06/30 Environ Sci Pollut Res Int. 2020 Aug; 27(22):27293-27304. doi: 10.1007/s11356-019-05695-w. Epub 2019 Jun 28"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 19-12-2024