Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractDwindling aromatic compounds in fine aerosols from chunk coal to honeycomb briquette combustion    Next AbstractA combination of quantitative marinating and Maillard reaction to enhance volatile flavor in Chinese marinated chicken »

Int J Environ Res Public Health


Title:Modeling Primary Emissions of Chemicals from Liquid Products Applied on Indoor Surfaces
Author(s):Wei W; Little JC; Nicolas M; Ramalho O; Mandin C;
Address:"Scientific and Technical Center for Building (CSTB), Health and Comfort Department, French Indoor Air Quality Observatory (OQAI), University of Paris-Est, CEDEX 2, 77447 Marne la Vallee, France. Department of Civil and Environmental Engineering, Virginia Tech, Blacksburg, VA 24060, USA"
Journal Title:Int J Environ Res Public Health
Year:2022
Volume:20220816
Issue:16
Page Number: -
DOI: 10.3390/ijerph191610122
ISSN/ISBN:1660-4601 (Electronic) 1661-7827 (Print) 1660-4601 (Linking)
Abstract:"Liquid products applied on material surfaces and human skin, including many household cleaning products and personal care products, can lead to intermittent emissions of chemicals and peak concentrations in indoor air. The existing case-based models do not allow inter-comparison of different use scenarios and emission mechanisms. In this context, the present work developed a mechanistic model based on mass transfer theories, which allowed emissions into the air from the liquid product to be characterized. It also allowed for diffusion into the applied surface during product use and re-emission from the applied surface after the depletion of the liquid product. The model was validated using literature data on chemical emissions following floor cleaning and personal care product use. A sensitivity analysis of the model was then conducted. The percentage of the chemical mass emitted from the liquid to the air varied from 45% (applied on porous material) to 99% (applied on human skin), and the rest was absorbed into the applied material/skin. The peak gas-phase concentration, the time to reach the peak concentration, and the percentage of the liquid-to-air emission depended significantly on the chemical's octanol/gas and material/gas partition coefficients and the diffusion coefficient of the chemical in the applied material/skin"
Keywords:"*Air Pollutants/analysis *Air Pollution, Indoor/analysis *Cosmetics/analysis Humans Porosity *Volatile Organic Compounds/analysis consumer exposure household cleaning products intermittent source personal care products volatile organic compounds;"
Notes:"MedlineWei, Wenjuan Little, John C Nicolas, Melanie Ramalho, Olivier Mandin, Corinne eng Research Support, Non-U.S. Gov't Switzerland 2022/08/27 Int J Environ Res Public Health. 2022 Aug 16; 19(16):10122. doi: 10.3390/ijerph191610122"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 24-11-2024