Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractIndoor air quality in a restaurant kitchen using margarine for deep-frying    Next AbstractDetermination of volatile organic compounds pollution sources in malaysian drinking water using multivariate analysis »

Anal Chem


Title:Inkjet-printed paper-based colorimetric sensor array for the discrimination of volatile primary amines
Author(s):Soga T; Jimbo Y; Suzuki K; Citterio D;
Address:"Department of Applied Chemistry, Faculty of Science and Technology, Keio University , 3-14-1 Hiyoshi, Kohoku, Yokohama 223-8522, Japan"
Journal Title:Anal Chem
Year:2013
Volume:20130917
Issue:19
Page Number:8973 - 8978
DOI: 10.1021/ac402070z
ISSN/ISBN:1520-6882 (Electronic) 0003-2700 (Linking)
Abstract:"This paper describes a colorimetric sensor array for the discrimination of volatile amines. Analyte discrimination is achieved by combining two functional elements: (1) a 'chemical class-selective' single chromogenic sensing dye with selectivity for amines in general, encapsulated into (2) polymer nanoparticles with different polarities. The resulting array has the ability to distinguish one closely related amine from another, relying on a polarity-based approach. In order to achieve reproducible, cost efficient, and flexible sensor array fabrication with the potential for mass production, inkjet-printing technology combined with standard copy paper as a sensor substrate is applied. Printing of 6 types of inks, which are prepared by mixing two dye encapsulating nanoparticles of different polarity in different mixture ratios, results in a colorimetric sensor array with a polarity gradient. Seven primary amines with increasing alkyl chain lengths have been selected to demonstrate the performance of the sensor array. The RGB color differences (DeltaR, DeltaG, DeltaB) of the sensor array spots before and after gas exposure were analyzed by principal component analysis (PCA) and agglomerative hierarchical clustering (AHC) analysis. Under the selected measurement conditions, results of PCA and AHC analysis indicated high discrimination ability with high reproducibility of the sensor array down to amine concentrations of 50 ppm. The discrimination ability was maintained at relative humidities between 10% and 80%. Furthermore, the sensor array showed no significant response to common volatile organic compounds, confirming the high selectivity toward amines. This is, to the best of our knowledge, the first report of a colorimetric sensor array with selectivity for a specific chemical class of analytes and the ability to discriminate compounds of the same class, which is obtained by simply mixing two types of single dye-encapsulating polymer nanoparticles"
Keywords:Amines/*analysis/chemistry Colorimetry/instrumentation/*methods *Ink Molecular Structure *Paper *Printing Volatilization;
Notes:"MedlineSoga, Tamaki Jimbo, Yusuke Suzuki, Koji Citterio, Daniel eng 2013/09/21 Anal Chem. 2013 Oct 1; 85(19):8973-8. doi: 10.1021/ac402070z. Epub 2013 Sep 17"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 04-12-2024