« Previous AbstractMicrobial volatile organic compound emissions from Stachybotrys chartarum growing on gypsum wallboard and ceiling tile    Next Abstract"Genetic isolation between two sympatric host plant races of the European corn borer, Ostrinia nubilalis Hubner. II: assortative mating and host-plant preferences for oviposition" »

J Air Waste Manag Assoc

Title:		Emission characteristics of ultrafine particles and volatile organic compounds in a commercial printing center
Author(s):		Betha R; Selvam V; Blake DR; Balasubramanian R;
Address:		"Department of Civil and Environmental Engineering, Faculty of Engineering, National University of Singapore, Singapore"
Journal Title:		J Air Waste Manag Assoc
Year:		2011
Volume:		61
Issue:		11
Page Number:		1093 - 1101
DOI:		10.1080/10473289.2011.604549
ISSN/ISBN:		1096-2247 (Print) 1096-2247 (Linking)
Abstract:		"Laser printers are one of the common indoor equipment in schools, offices, and various other places. Laser printers have recently been identified as a potential source of indoor air pollution. This study examines the characteristics of ultrafine particles (UFPs, diameter <100 nm) and volatile organic compounds (VOCs) emitted from laser printers housed in a commercial printing center. The results indicated that apart from the printer type, the age of printers, and the number of pages printed, the characteristics of UFPs emitted from printers also depend on indoor ventilation conditions. It was found that at reduced ventilation rates of indoor air, there was a rise in the number concentration of UFPs in the printing center. Interestingly, the contribution of UFPs to the total number of submicrometer-sized particles was observed to be higher at a sampling point far away from the printer than the one in the immediate vicinity of the printer. Black carbon (BC) measurements showed a good correlation (rs = 0.82) with particles in the size range of 100-560 nm than those with diameters less than 100 nm (rs = 0.33 for 50-100 nm, and rs = -0.19 for 5.6-50 nm particles). Measurements of VOCs in the printing center showed high levels of m-, o-, and p-xylene, styrene, and ethylbenzenes during peak hours of printing. Although toluene was found in higher levels, its concentration decreased during peak hours compared to those during nonoperating hours of the printing center"
Keywords:		Air Pollutants/*chemistry *Industry Lasers *Particle Size *Printing Volatile Organic Compounds/*chemistry;
Notes:		"MedlineBetha, Raghu Selvam, Valliappan Blake, Donald R Balasubramanian, Rajasekhar eng 2011/12/16 J Air Waste Manag Assoc. 2011 Nov; 61(11):1093-101. doi: 10.1080/10473289.2011.604549"