« Previous AbstractNovel acidic sesquiterpenoids constitute a dominant class of pathogen-induced phytoalexins in maize    Next AbstractMarine fragrance chemistry »

Nanomaterials (Basel)

Title:		Impact of Nanocomposite Combustion Aerosols on A549 Cells and a 3D Airway Model
Author(s):		Hufnagel M; May N; Wall J; Wingert N; Garcia-Kaufer M; Arif A; Hubner C; Berger M; Mulhopt S; Baumann W; Weis F; Krebs T; Becker W; Gminski R; Stapf D; Hartwig A;
Address:		"Department of Food Chemistry and Toxicology, Institute of Applied Biosciences, Karlsruhe Institute of Technology, 76131 Karlsruhe, Germany. Institute for Technical Chemistry, Karlsruhe Institute of Technology, 76344 Eggenstein-Leopoldshafen, Germany. Institute for Infection Prevention and Hospital Epidemiology, Medical Center-University of Freiburg, Faculty of Medicine, University of Freiburg, 79110 Freiburg, Germany. Fraunhofer Institute of Chemical Technology, 76327 Pfinztal, Germany. Vitrocell(R) Systems GmbH, 79183 Waldkirch, Germany. Palas GmbH, 76229 Karlsruhe, Germany"
Journal Title:		Nanomaterials (Basel)
Year:		2021
Volume:		20210627
Issue:		7
Page Number:		-
DOI:		10.3390/nano11071685
ISSN/ISBN:		2079-4991 (Print) 2079-4991 (Electronic) 2079-4991 (Linking)
Abstract:		"The use of nanomaterials incorporated into plastic products is increasing steadily. By using nano-scaled filling materials, thermoplastics, such as polyethylene (PE), take advantage of the unique properties of nanomaterials (NM). The life cycle of these so-called nanocomposites (NC) usually ends with energetic recovery. However, the toxicity of these aerosols, which may consist of released NM as well as combustion-generated volatile compounds, is not fully understood. Within this study, model nanocomposites consisting of a PE matrix and nano-scaled filling material (TiO(2), CuO, carbon nano tubes (CNT)) were produced and subsequently incinerated using a lab-scale model burner. The combustion-generated aerosols were characterized with regard to particle release as well as compound composition. Subsequently, A549 cells and a reconstituted 3D lung cell culture model (MucilAir, Epithelix) were exposed for 4 h to the respective aerosols. This approach enabled the parallel application of a complete aerosol, an aerosol under conditions of enhanced particle deposition using high voltage, and a filtered aerosol resulting in the sole gaseous phase. After 20 h post-incubation, cytotoxicity, inflammatory response (IL-8), transcriptional toxicity profiling, and genotoxicity were determined. Only the exposure toward combustion aerosols originated from PE-based materials induced cytotoxicity, genotoxicity, and transcriptional alterations in both cell models. In contrast, an inflammatory response in A549 cells was more evident after exposure toward aerosols of nano-scaled filler combustion, whereas the thermal decomposition of PE-based materials revealed an impaired IL-8 secretion. MucilAir tissue showed a pronounced inflammatory response after exposure to either combustion aerosols, except for nanocomposite combustion. In conclusion, this study supports the present knowledge on the release of nanomaterials after incineration of nano-enabled thermoplastics. Since in the case of PE-based combustion aerosols no major differences were evident between exposure to the complete aerosol and to the gaseous phase, adverse cellular effects could be deduced to the volatile organic compounds that are generated during incomplete combustion of NC"
Keywords:		air-liquid interface (ALI) incineration nano-enabled polymer (NEP) nanocomposite nanoparticles nanotoxicology;
Notes:		"PubMed-not-MEDLINEHufnagel, Matthias May, Nadine Wall, Johanna Wingert, Nadja Garcia-Kaufer, Manuel Arif, Ali Hubner, Christof Berger, Markus Mulhopt, Sonja Baumann, Werner Weis, Frederik Krebs, Tobias Becker, Wolfgang Gminski, Richard Stapf, Dieter Hartwig, Andrea eng 03XP0009 Procycle/Bundesministerium fur Forschung und Technologie/ Switzerland 2021/07/03 Nanomaterials (Basel). 2021 Jun 27; 11(7):1685. doi: 10.3390/nano11071685"